|
|
 |
 |
 |
|
These locks are virtually impossible to impression or pick because they contain split tumblers in some positions.
Some of the these Toyotas are very hard to open with car opening tools as well. Now your problems have been solved because the Toyota TR47 Determinator will aide you in decoding the door lock in a quick, simple and reliable manner.
Even if the car is locked you can still make a key to open it.
The Toyota TR47 Determinator will give you the confidence and a professional look in handling this locking system.
The Toyota TR47 DETERMINATOR set works on all Toyota / GEO products using the code series 10,000-15,000 on the X217, TR47 keyblanks.
When used properly you will be able to generate a key for a vehicle in just a few moments.
There is one tool in the Toyota TR47 Determinator Set.
The Toyota TR47 lock system has 8 spaces. When the DETERMINATOR traps a 3 or a 4 depth tumbler you will use the spring steel release tool to raise the tumbler and withdraw the DETERMINATOR to the next trumbler location.
Slide the release tool along the slot in the side of the tool, sloped end first. You will feel it raise the tumbler, slowly pull the DETERMINATOR out a little to the next space and remove the release tool.
If the DETERMINATOR traps a tumbler in space 4 or 7 you will need to use BOTH release tools.
Insert one release tool fully into the lock along the blade, and then insert the other release on the other side of the blade. You will feel each split tumbler move up as you insert the release tool.
Once you have released each side slowly pull the DETERMINATOR out to the next space THEN remove the relase tools.
If the split tumblers in spaces 4 and 7 do not release properly, simply push the DETERMINATOR fully back into the lock, and insert both release tools again.
Slide the DETERMINATOR to the next space and THEN remove the release tools.
You can also do this if you have trouble releaseing any other trapped tumbler.
If one of the regular tumblers has trouble releasing, simply try the release tool on the other side of the blade.
WARNING:
The lock systems on these vehicles incorporate split tumblers (half tumblers) in spaces 4 and 7.
You must be careful not to bend or damage these tumblers when generating a key.
When you trap a tumbler you will know that it's either a 3 or a 4 depth tumbler. You will cut a 3-1/2 depth cut in that particular space, EXCEPT for spaces 4 and 7. If you trap a tumbler in space 4 and/or 7 cut a 3 depth cut.
On spaces that were passed you know that they are either a 1 or a 2 depth tumbler. You will cut a 1-1/2 depth cut in those spaces, EXCEPT for spaces 4 and 7.
If space 4 and/or 7 passed, cut it as a 1 depth.
Once you have decoded the lock and have cut your key with the appropriate cuts as explained above, you will now impression carefully.
If space 4 and/or 7 mark you will lower them down once full depth. If the other spaces mark you will cut them down as well.
Keep in mind that the MACS is 2. You will never have a 1 depth beside a 4 depth.
Once you get your key to turn, (use your locksmith judgment on how far to turn the key) you can now re-cut the key with the exact cuts.
Copyright © 2007 LLS Sales
Product Code: DETER-TOY-TR47
|
|
|
|
|
|
 |
|
 |
|
|