Home > DETERMINATORS >

  Mazda 7-Cut Determinator

 
  • No more hassles of pulling these door panels. With the Determinator you will be moving on to your next job fast!!

  • Code Series: 6500-7733

  • Key Blanks: X131, X178, X202

  • The Mazda 7-Cut DETERMINATOR set works on Mazda products using the code series 6500-7733 on the X131 or similar Key Blank.

  • When used properly you will be able to generate a key for a vehicle in just a few moments.

  • There is one tool in the Mazda 7-Cut DETERMINATOR set.

  • The DETERMINATOR determines the depth of a tumbler by trapping the 3 and 4 tumblers and passing the 1 and 2 tumblers.

  • As you decode the lock record an "A" if the DETERMINATOR passes a tumbler and record a "B" if it is trapped. Cut all "A" cuts to a 1 1/2 depth, and cut all "B" cuts to a 3 1/2 depth.

  • The result is a custom half-cut tryout key.

    THE TOOL

  • The DETERMINATOR is a decoding tool and a tumbler release tool.

  • The DETERMINATOR has numbers stamped on both sides of the blade.

  • These numbers correspond to the tumbler space locations.

  • When the tool is inserted into the look, the number closest to the face of the lock indicates the space which is being determined.

  • When the DETERMINATOR traps a 3 or 4 tumbler you will use the spring steel release tool to raise the tumbler and withdraw the DETERMINATOR to the next tumbler location.

  • Slide the release tool along the slot in the side of the tool, sloped end first. You will feel it raise the tumbler, slowly pull the DETERMINATOR out a little to the next space and remove the release tool.

    Copyright © LLS Sales




    Our Price: (Members Only)


    Product Code: DETER-MAZDA-7CUT

    • Description
    		 
  • No more hassles of pulling these door panels. With the Determinator you will be moving on to your next job fast!!

  • Code Series: 6500-7733

  • Key Blanks: X131, X178, X202


    • Browse for more products in the same category as this item:

    DETERMINATORS
    MAZDA
    MAZDA > DETERMINATORS