|
|
 |
 |
 |
|
- With the GM 10-Cut Determinator kit you will be able to originate a key in no time.
- It works on older GM 10-Cut lock systems which were introduced in 1994 and now used on many models.
- End the confusion of knowing what to do on one of these cars or trucks.
- With the Determinator and the Wave Keys,™ you will have confidence in knowing that you can make a key to get your customer on the road quickly.
- No drilling or pulling door panels. Works on VATS, Transponders and all GM 10-Cut lock systems.
- The G.M. 10-cut DETERMINATOR set works on G.M. products using the 10- cut system.
- When used properly you will be able to generate a key for a vehicle quickly.
- The DETERMINATOR determines the depth of a tumbler by trapping the 3 and 4 depth tumblers and passing the 1 2 depth tumblers.
- As you decode the lock record a "A" if the DETERMINATOR passes a tumbler and record a "B" if it is trapped.
- Cut all "A" cuts to 1 1/2 depth. Cut all "B" cuts to 3 1/2 depth.
- The result is a custom half-cut tryout key.
THE TOOL
- The DETERMINATOR is a decoding tool and a tumbler release tool.
- The DETERMINATOR has numbers stamped on both sides of the blade.
- These numbers correspond to the tumbler space locations.
- When the tool is inserted into the look, the number closest to the face of the lock indicates the space which is being determined.
- When the DETERMINATOR traps a 3 or 4 depth tumbler you will use the spring steel release tool to raise the tumbler and withdraw the DETERMINATOR to the next tumbler location.
- Slide the release tool along the slot in the side of the tool, sloped end first.
- You will feel it raise the tumbler, slowly pull the DETERMINATOR out a little to the next space and remove the release tool.
- Your DETERMINATOR package contains charts of vehicle makes and lock systems. You will need to reference these charts each time you originate a key for a vehicle.
- It also contains procedure charts with instructions to originate keys.
IT ALSO CONTAINS THE FOLLOWING TOOLS:
- one stamped "3 4 5 6 7" used on spaces 3-7 in door locks
- one stamped "6 7 8 9 10" used on spaces 6-10 in door locks
- one stamped "3 4 5 6 7 8 9" used on spaces 3-9 in door locks
- one stamped "C A B" used to determine tumbler placement in door locks
- five Wave Keys used to pick ignitions
Product Code: DETER-GM-1
|
|
|
|
|
|
 |
|
 |
|
|