|
|
 |
 |
 |
|
- Introduced in 1996 and now a standard on almost all Fords is the new 8 cut lock system.
- Armed with the Determinator you will be able to originate these keys in a timely manner.
- Decoding the door lock is a simple task and our special Ford 8-Cut code chart will have your customer on the roadin no time at all.
- Works on the code-series 0001X-1706X.
- Don’t waste your time pulling door panels or needless ignition drilling.
- The Ford 8 cut DETERMINATOR set works on all Ford products using the 8 cut system.
- When used properly you will be able to generate a key for a vehicle in just a few moments.
- There are two keys in the DETERMINATOR Ford 8 cut system. One is stamped with a "3" and the other is stamped with a "B".
- The "3" DETERMINATOR will trap tumblers with depths of 3, 4 5. It will pass tumblers pass tumblers with a depth of 1 or 2.
- The "B" traps tumblers with depths of 4 and 5.
THE TOOL
- The DETERMINATOR is a decoding tool and a tumbler release tool.
- The DETERMINATOR has numbers stamped on both sides of the blade. These numbers correspond to the tumbler space locations.
- When the tool is inserted into the look, the number closest to the face of the lock indicates the space which is being determined.
- When the DETERMINATOR traps a tumbler you will use the spring steel release tool to raise the tumbler and withdraw the DETERMINATOR to the next tumbler location.
- Slide the release tool along the slot in the side of the tool, sloped end first. You will feel it raise the tumbler, slowly pull the DETERMINATOR out a little to the next space and remove the release tool.
Copyright © 2007 LLS Sales
Product Code: DETER-FORD-8-CUT
|
|
|
|
|
|
 |
|
 |
|
|