|
|
 |
 |
 |
|
- With the Ford 10-Cut Determinator you can quickly and easily obtain a working key for the door lock.
- This Determinator works on door locks that contains tumblers in spaces 1-6, 4-8 and 4-9.
- It works like a charm and saves you time!!!!
- The Ford 10 cut DETERMINATOR set works on all Ford products using the 10 cut system.
- When used properly you will be able to generate a key for a vehicle in just a few moments.
- There are two different DETERMINATOR sets for the Ford 10 cut system.
- One set has 2 keys stamped 123456, used on your basic 10 cut with door spaces 1-6.
- The other set has 2 keys stamped 45678 used on the Nissan Quest, Mercury Villager, and some Escorts.
- There are 2 keys in each set. One is stamped with an "A" and the other is stamped with a "B".
- The "A" DETERMINATOR will trap tumblers with depths of 2 & 3.
- The "B" traps tumblers with depths of 4 and 5.
- Cut all `A" cuts to a 2 1/2 depth, and cut all "B" cuts to a 4 1/2 depth.
- The result is a custom half-cut tryout key.
THE TOOL
- The DETERMINATOR is a decoding tool and a tumbler release tool.
- The DETERMINATOR has numbers stamped on both sides of the blade. These numbers correspond to the tumbler space locations.
- When the tool is inserted into the look, the number closest to the face of the lock indicates the space which is being determined.
- When the DETERMINATOR traps a tumbler you will use the spring steel release tool to raise the tumbler and withdraw the DETERMINATOR to the next tumbler location.
- Slide the release tool along the slot in the side of the tool, sloped end first.
- You will feel it raise the tumbler, slowly pull the DETERMINATOR out a little to the next space and remove the release tool.
Copyright © 2007 LLS Sales
Product Code: DETER-FORD-10-CUT
|
|
|
|
|
|
 |
|
 |
|
|